How Can Hardware Product Certification Surge your Product Awareness?
The market size of embedded products is expected to grow by USD 76.39 billion from 2020 to 2025. If you are an electronics product company or an engineering company that is about to launch a product, you will need a hardware product certificate.
But, are you worried about launching your product? Or can you not produce your own mass-produced product? Can’t play ads for your product because you are not verified?
To make any of the above, you will need a lot of certificates before you can start mass production or sale. Each country’s market needs its own certificates. Later in this blog, we have outlined some product certificates for the US, Canada, EU, and the UN.
Source: Xekera Systems
global embedded products market
Failed certification test? Don’t worry!
Often, product and software engineering companies fail to obtain certification on the first run.
Don’t be discouraged, and talk to us at Xekera Systems for help with compliance.
What are the Essential Benefits of Complying/Certifying your Products?
Securing your hardware with international standards can be a daunting task but it will bear fruit in the future. And that is the promise!
The most important thing in certified products is to assure consumers that they are safe to use. In addition, it complies with national health and safety measures. This helps the company over time by tapping new markets, reaching all over the world, gaining new customers, etc.
Beneficiary Point!
DON’T HURRY TO CHECK! If you expect to make major changes in the design or development of computer hardware after obtaining a certificate, you are more likely to make the test worthless.
Confused about when to go for the test? Ask our Xekera Systems experts!
We can help you in a few ways to make your product more reliable and better in quality. And we, at Xekera Systems, can improve your product and meet the applicable standards.
Let’s check why you should hire a consulting partner for certifications for electronic hardware products:
Pre-Compliance Certification Compliance Product Certificate Compliance
Can you imagine the pain of failing the certification tests over and over again because of minor mistakes?
Getting multiple certification exam cycles can be difficult to pocket and time consuming. But, we have your solution. We can save your time by using DUT (Device Under Test) and prepare test certification cases for final certification.
However, if you want to complete the certification process and wish to avoid repeated testing at the same time, contact us for product verification.
Best Test Partner with All Tools
Once your product is ready, we can use tests as well. EWW has the necessary equipment in place for testing. If necessary, we also rent labs to cover all the equipment needs, so it is not necessary.
Xekera System Services — Regardless of your needs, just contact us and we have a solution for every problem.
Ownership of Certification Process
Our skilled professional staff can stand in accredited homes on behalf of your company. Caring for the pre-compliance process is also our responsibility. Taking the pain of getting a product approval from us, while you can relax and wait for the authorization certificate.
100% Safety and Security
People tend to trust products that have a certificate or a piece of jewelry that have a diamond-level mark. For example, such a certificate helps to win the trust of the customer.
After you know the full benefits of hardware hardware certification, let us enlighten you about the types of certification your product needs.
Certifications Electronic Products in the Market
There are enough certificates that apply to hardware engineering products. However, what is right for your product can be difficult to measure. All hardware product certification requirements are different.
Let’s take a look at the most popular hardware certificates for each:
Source: Xekera Systems
FCC
The FCC is a symbol and short for the Federal Communications Commission. This certificate ensures that the RF (Radio Frequency) emitted by the electronic product and its compatibility with electricity is within the maximum allowable limit. The goal is that moving signals should not interfere with and distort communication.
In addition, the certification required for electrical products can be achieved if all FCC guidelines in Section 15 are complied with.
IC
Industrial Candara, the IC brand in the product, is a very similar certification equivalent to the FCC. It follows the same rules as the FCC.
DID YOU KNOW???
If less than a year your product has passed the FCC, you can immediately get the IC of your computer hardware.
CE RED
To produce, import, or sell your products in the EU (European Union) market, you must have a CE RED mark, that is, a Radio Equipment Directive: Conformité Européenne.
The CE mark confirms that the product is compliant with the safety, health and environmental laws of the 28 EU member states.
UL or CSA
If you want to make or market your product in the US or Canada, your battery-powered computers will need a Certificate of Underwriters Laboratories or a Canadian Standards Association Certificate.
You can sell your products in the US without an electronic hardware certificate, but you could be charged if anything goes south. Why take such a risk when you can risk it by carefully examining the international industry standards for your product.
UL assures you to sell your product in the US, while CSA qualifies you to sell your products in the US and Canada.
- UL1642 — Lithium polymer batteries, that is, cells
- UL2054 — Home and Commercial Batteries Rechargeable and Non-Charging
KEY POINT TO GET!
UN / DOT 38.3 (United Nations) & (U.S. Department of Transportation) — This certification standard does not require a third party lab or assistance. Ensures safe transport of lithium content batteries worldwide.
RoHS
Hazardous Substances Limitation is the authorization of EEE (electrical and electronic equipment) in the EU. About ten harmful metals (such as mercury, cadmium, lead, etc.) should not be present in the hardware. If found, the product is not authorized by RoHS. However, this is very much focused on a particular product, and it is a straight line of law.
RoHS accreditation is one of the most prominent electronic product certificates.
Various methods detect unsafe metals in the hardware. One is XRF (X-Ray Fluorescence Spectroscopy), and the other is a chemical-based laboratory test.
Reach
Registration, Testing, Approval, and Chemical Restrictions are a horizontal line of certification intended for the entire product life cycle.
REACH can be self-proclaimed, or a third party can provide results. You will need this certificate for products such as paints, varnishes, chemicals, etc.
NOTE:
We also have experience in obtaining certificates for Zigbee, Zwave, Bluetooth and Wi-Fi wireless technology products.
How To Get Your Product Certified?
After reviewing product certification, you should ask yourself what is the process of obtaining the hardware certification for your hardware.
We made the process easier for you in 6 steps:
1. Apply for a Certificate of Receipt
You cannot produce collections of your product without obtaining a certificate. Obtain valid certificates and authorities that can confirm your product. You can do it yourself or hire a certification partner.
2. Testing
Before you post your product, it is best to check the product for yourself. This means you can create a checklist and make sure everything related to product quality is taken care of.
3. Submit to Approval House
The next step is to submit the product and its details to the accreditation house.
4. Get Approval
After sending the product to the certification house, if your product marks all checkboxes, then you get permission.
5. Adding the Certificate Mark
Now is the time to enjoy all the benefits of a hardware product certificate. Once you have obtained a product certificate, you can start by mass production and sell it locally or overseas.
6. Maintain the Certification
The certification partner work ends at this stage. You can maintain a certificate by maintaining the quality of your product and not making unnecessary changes that could cause your product to deviate from the approved category.
Wrap Up! — Hardware Product Certification
It’s not about how often we test whether we comply with your product; we want your product to pass approval at the last test. Our policy is the same as yours, to get your product approval. We believe in trying to get the results you want for your hardware product certificate.
We have the right path to achieve hardware engineering services for you.
Hire a CTO at Xekera Systems to get started with the certification process. Additionally, you can also find a cost method as your product specification.
Frequently Asked Questions About Computer Hardware Product Certificate
Q1. How much is a hardware product process process?
In fact, the process of premature compliance and certification by authorized houses depends entirely on the type, specificity and complexity of the product. The length of time also depends on the speed and expertise of the agency you hired to get the help of a certificate.
Q2. What certificates are required for hardware products?
There are a number of hardware product certifications as regulated by industry. The main ones are FCC, IC, CE, RoHS, REACH, UL, CSA among many others. If you have any questions about this, consult the team at Xekera Systems.
get started with us, just call us at (408) 982–5851 or contact us online today!
- Fill Form
- Orignal Content : Xekera Systems
